Working frequency	125HKz
Communication format	9600BPS 8,N,1.
Card reading distance	>13cm (long distance thick card up to 20cm)
Card reading time	<100ms
Card reader type	IC (MF1) card
Output interface	standard ESD
Serial interface protocol	(RS232) ASC
Encoding head (or extended keyboard code))
Technical indicators Ambient temperature	-10°C -40°C
Power supply	DC-5V USB or keyboard port power supply
Relative humidity	15%～85%RH
Maximum power consumption	100mW
Card reading distance	0-20cm
Dimensions	length 110mm*width 80mm height*25mm
Net weight	≈0.3 kg

 Q1. What is the operating voltage range for this Wired Infrared Detector? A: The working voltage for this Wired Infrared Detector is in the range of DC9 to DC16 volts. Q2. What is the typical current consumption of the detector at a DC12V input? A: The consumption current for the detector is approximately 25mA when operated at DC12V. Q3. Can this detector function in extreme temperature conditions? A: Yes, the Wired Infrared Detector is designed to operate within a temperature range of -10℃ to +55℃. Q4. What type of sensor is used in this detector? A: This detector utilizes a dual-element low noise pyroelectric infrared sensor for accurate motion detection. Q5. How can I mount the detector? Can it be installed on both walls and ceilings? A: The detector offers flexibility in mounting and can be installed either on the wall or the ceiling. Q6. Is there a specific installation height requirement for this detector? A: Yes, the recommended installation height for optimal performance is below 4 meters. Q7. What is the detection range of this Wired Infrared Detector? A: The detector has a detection range of 8 meters, allowing it to cover a significant area. Q8. What is the detection angle of this detector? A: The Wired Infrared Detector provides a detection angle of 15 degrees for accurate motion sensing. Q9. Could you explain the pulse counting options available for this detector? A: This detector offers pulse counting options: primary (1P) and secondary (2P), allowing for customizable sensitivity. Q10. What is the purpose of the anti-disassembly switch and its voltage output? A: The anti-disassembly switch has a normally closed (NC) no-voltage output configuration. It features a contact capacity of 24VDC and 40mA, enhancing security.